1 Use the wheel cutter should try to avoid the rotational direction of the grinding wheels around the staff, the cut material may not extend into the sidewalk.
2 machine does not agree with explosive dust in places.
3 mobile cutting machine base four support wheels should be complete in good condition, install a solid, flexible rotation. Resettlement should be balanced and reliable, no obvious shock at work.
4 clamping device should be flexible operation, reliable clamping, hand wheel, screw, nut, etc. should be in good condition, the screw thread shall not slide wire, Labelling phenomenon. Hand wheel operating force is generally not more than 6kg.
5 lever should have sufficient strength and rigidity, installed after all the parts to maintain the grinding wheel free lift.
6 lever shaft should be intact, flexible and reliable rotation, and the rear lever lock nut assembly applications.
7 replacement cutting wheel films, must cut off the power. Newly installed wheel-cutting, to meet the equipment requirements, shall be equipped with quality problems of cut sheet. According to the installation program to install.
8 Replace the rear wheel cutting tablets to try to run if there is a significant shock, confirm normal operation before using.
9 jogbox or switch must be in good condition, and have ground protection.
10 transmission and wheel guards must be safe and reliable, and can block the rear wheel broken flying debris. Baffle ends should be firmly attached to the housing, work prohibited removed.
Staff joysticks 11 is manipulated for cutting movement, the force should be uniform, smooth, not too much force, so as not to overload the grinding wheel cutting tablets crack.
12 After use, turn off the power, finishing well placed.
没有评论:
发表评论